-
DataFree Series DF-75061-to-2 Intelligent SATA II Internal RAID SolutionOperation Modes※FAST (RAID 0)
- Allows the device to perform striping which enables the drives
to provide maximum throughput.
※SAFE (RAID 1)
- Allow device to automatically copy primary hard drive without
any performance overhead on the CPU
※SAFE33
- creates two virtual volumes, one SAFE (RAID 1) volume (1/3
capacity) and one BIG volume (2/3 capacity)
※SAFE50
- creates two virtual volumes, one SAFE (RAID 1) volume (1/2
capacity) and one BIG volume (1/2 capacity)
※BIG(Drive panning)
- Concatenates the physical hard drives as a single large volume
with larger capacity
※JBOD
- Enables each hard drive to be seen separately as individual drive
Fault Tolerance
‧DataFree support RAID level 0, 1, SAFE33 and SAFE50 safeguarding your valuable assets from loss
due to HDD failure or system crash.
Easy Installation and Manageability
‧Non driver adding internal disk storage to a PC, workstation or network servers.
‧Easy to use automatic RAID mode configuration.
‧No occupies PCI bus slot or extra system resources.
User Friendly
‧DataFree is equipped with front panel LED indicators providing immediate visual status to the user.
‧Provides windows-based GUI utility for management, configuration and monitoring.
Secure
‧DataFree is a reliable solution that provides enhanced data protection.
ModelDF-7506 Form-factorFull height 5.25”internal mounting Operation ModesFAST(RAID 0), SAFE(RAID 1), JBOD, BIG, SAFE33, SAFE50 Host / Disk bus interfaceeSATA II 3Gb Data transfer rateUp to 3Gb/s Hot-swap drive traysTwo (2) 3.5 inch trays Cooling fan1 Security lockYes Audible alarmYes Failed drive indicatorYes Continuous RebuildYes GUI RAID managerYes Email NotificatioYes Environmental
Relative Humidity
10% ~ 85% Non-condensing Operating Temp10°C ~ 40°C (50°F ~ 104°F) Physical Dimensions85.3(H) x 149(W) x 223(D) mm Weight1.9kgs (without drives)