Wifi EnGenius ECB1750 - Tân Long, Wifi chuyên dụng, Thiết bị lưu trữ Nas, Wifi Ubiquiti, Wifi Unifi, Roter Mikrotik , nas synology, H3c , Fortinet, Cisco

Wifi EnGenius ECB1750

Sự hài lòng quý khách hàng là nền tảng giúp công ty phát triển bền vững. Chúng tôi mong luôn được sự tín nhiệm và ủng hộ của quý khách hàng trong và ngoài nước. Hãy liên hệ với chúng tôi khi Quý khách hàng có nhu cầu:

Wifi EnGenius ECB1750

« «

Thông tin chi tiết
Sản phẩm khác

Tốc độ không dây 802.11ac lên đến 1300 Mbps trên băng tần 5 GHz
<     802.11n không dây tốc độ lên đến 450 Mbps trên băng tần 2.4 GHz
<     Lên đến 29 dBm truyền tải điện năng mỗi band
<     Ban nhạc chỉ đạo phát hiện khách hàng băng tần kép và thay đổi chúng để các băng tần 5 GHz để giảm bớt tắc nghẽn mạng trên băng tần 2,4 GHz
<     6 có thể tháo rời anten 5 dBi omni-directional, 3 mỗi band

Lý tưởng cho chuyển file, VoIP, hội nghị video, streaming nhiều video HD, âm nhạc, và các ứng dụng đa phương tiện khác
Đồng thời dòng 3x3 kép ban nhạc lên đến 450 Mbps trên 2,4 GHz và lên đến 1300 Mbps trên băng tần 5 GHz cho hiệu suất thông không dây tối đa.
Power-over-Ethernet Tùy chọn
Hỗ trợ cấp nguồn qua Ethernet (IEEE 802.3at) để sử dụng với 802.3at PoE có khả năng chuyển mạch hoặc tiêm chích chỉ để triển khai trong khu vực nơi mà các cửa hàng điện không có sẵn. Các ECB1750 thu hút 25 watt điện.

Technical Specifications
Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standards: IEEE 802.11a/n/ac on 5 GHz; IEEE 802.11b/g/n on 2.4 GHz
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n: 5.18-5.24, 5.26-5.32, 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 450 Mbps on 2.4 GHz and up to 1300 Mbps on 5 Ghz
Memory: 128MB
Flash Memory: 16MB
Peak Power: Up to 22W
Antenna Array
Six (6) External 5 dBi Omni-Directional Antennas
Physical Interface
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) Port with PoE Support
1 x Reset Button
Power Jack

Power Requirements
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Receiver Sensitivity
802.11n (5 GHz)
-94dBm @ MCS0
-76dBm @ MCS7
-91dBm @ MCS8
-73dBm @ MCS15
802.11n (2.4 GHz)
-95dBm @ MCS0
-77dBm @ MCS7
-91dBm @ MCS8
-75dBm @ MCS15
802.11a (5 GHz)
-95dBm @ 6Mbps
-80dBm @ 54Mbps
802.11b (2.4 GHz)
-95dBm @ 1Mbps
-91dBm @ 11Mbps

Available Transmit Power
(Max. Power may be different depending on local regulations)
802.11n (5 GHz)
27dBm @ MCS0~2/MCS8~10
26dBm @ MCS3/MCS11
25dBm @ MCS4/MCS12
23dBm @ MCS5/MCS13
22dBm @ MCS6/MCS14
21dBm @ MCS7/MCS15
802.11n (2.4 GHz)
27dBm @ MCS0~2/MCS8~10
27dBm @ MCS3/MCS11
26dBm @ MCS4/MCS12
25dBm @ MCS5/MCS13
24dBm @ MCS6/MCS14
23dBm @ MCS7/MCS15
802.11a (5 GHz)
26dBm @ 6~24Mbps
25dBm @ 36Mbps
23dBm @ 48Mbps
21dBm @ 54Mbps
802.11b (2.4 GHz)
7dBm @ 1~11Mbps
SoftwareTopology
Infrastructure/Ad-Hoc
Operation Modes
Access Point. Client Bridge. WDS Access Point. WDS Station. WDS Bridge

Multiple BSSID
Supports up to 8 BSSIDs per radio
LAN
IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging
Spanning Tree
Supports 802.1d Spanning Tree Protocol
Wireless
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
QoS
WMM (Wireless Multimedia)
VPN
Pass-through (PPTP, L2TP, IPSec)
WPS
Software only

Management
Tx Power Control
Adjust transmit power by dBm
Configuration
Web-based configuration (http)/Telnet
Telnet Server
CLI
Firmware Upgrade
Via web browser, settings are reserved after upgrade
Administrator Setting
Administrator Username and Password Change
Reset Setting
Reboot (press 1 second).
Reset to factory default (press 10 seconds)
System Monitoring
Status Statistic and Event Log
SNMP
V1, V2c, V3
MIB
MIB I, MIB II (RFC1213) and private MIB
Traffic Shaping
Incoming and outgoing wireless traffic shaping
Auto-channel Selection
Automatically selecting least congested channel
Bandwidth Measurement
IP range and bandwidth management
Auto Reboot
Reboot Access Point by minute, hour, day, or week
Backup and Restore
Save and restore settings through Web interface
CLI
Supports Command Line Interface
Diagnosis
IP pinging statistics
Log
SysLog and Local Log support
LED Control
On/Off
AP Detection
Scanning for available EnGenius APs
Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)
QoS (Quality of Service)
WMM (Wireless Multimedia)
Environmental & PhysicalTemperature Range
Operating: 0ºC to 50ºC (32º to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Certifications
FCC, IC
Physical Security
Kensington Security Slot

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved.
Dimensions & Weights

ECB600 Device
Weight: 1.20 lbs.
Width: 5.51”
Length: 7.44”
Height: 1.02”
Package Contents
ECB1750 Dual band AC1750 Indoor Access Point/Client Bridge
12V/2A Power Adapter
RJ-45 Ethernet Cable
Quick Installation Guide
Warranty
1 Year