EnGenius ECB600

$ 279 / ea

  • EnGenius ECB600
  • Wireless 802.11 a/b/g/n, 300 Mbps - 2.4 GHz + 300Mbps -5Ghz
    Chíp: AR9344+AR9382
    Tính năng: AP/CB/WDS/Repeater.
    Kết nối: 1 Gigabit LAN/WAN
    Công suất: 29dBm , ăngten 4 x 5dBi gắn ngoài (có thể thay thế ănggten)
    Bảo mật: WEP, WPA, WPA 2, Lọc địa chỉ MAC
    Nguồn: PoE 802.3at


     
    Technical Specifications
    Hardware
    RF: 2.4 and 5 GHz Frequency Bands
    Standard: IEEE 802.11a/b/g/n
    Radio I: 11b/g/n: 2.412~2.484 GHz
    Radio II: 11a/n: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
    Data Rate: Up to 300 Mbps in both frequency bands
    Memory: 64MB
    Flash Memory: 8MB
    Peak Power: Up to 14W


    Antenna
    Four (4) External 5 dBi Omni-Directional Antennas

    Physical Interface
    1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps)
    1 x Reset Button
    Power Jack

    Power Requirements
    Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
    (depends on different countries)
    Active Ethernet (Power-over-Ethernet, IEEE 802.3at/af)
    Power Adapter (United States) 48VDC/0.375A
    Device: 12V/2A

    Modulations
    OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK

    Operating Channels
    2.4 GHz: US/Canada 1-11
    5 GHz: Country dependent for the following ranges:
    36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165

    Receiver Sensitivity
    802.11n (5 GHz)
    -94dBm @ MCS0
    -76dBm @ MCS7
    -91dBm @ MCS8
    -73dBm @ MCS15

    802.11n (2.4 GHz)
    -95dBm @ MCS0
    -77dBm @ MCS7
    -91dBm @ MCS8
    -75dBm @ MCS15

    802.11a (5 GHz)
    -95dBm @ 6Mbps
    -80dBm @ 54Mbps

    802.11b (2.4 GHz)
    -95dBm @ 1Mbps
    -91dBm @ 11Mbps

    Available Transmit Power
    (Max. Power may be different depending on local regulations)
    802.11n (5 GHz)
    27dBm @ MCS0~2/MCS8~10
    26dBm @ MCS3/MCS11
    25dBm @ MCS4/MCS12
    23dBm @ MCS5/MCS13
    22dBm @ MCS6/MCS14
    21dBm @ MCS7/MCS15

    802.11n (2.4 GHz)
    27dBm @ MCS0~2/MCS8~10
    27dBm @ MCS3/MCS11
    26dBm @ MCS4/MCS12
    25dBm @ MCS5/MCS13
    24dBm @ MCS6/MCS14
    23dBm @ MCS7/MCS15

    802.11a (5 GHz)
    26dBm @ 6~24Mbps
    25dBm @ 36Mbps
    23dBm @ 48Mbps
    21dBm @ 54Mbps

    802.11b (2.4 GHz)
    7dBm @ 1~11Mbps

    Software
    Topology
    Infrastructure/Ad-Hoc

    Operation Modes
    Access Point, WDS Bridge, WDS Access Point, Universal Repeater

    Multiple BSSID

    Supports up to 8 BSSIDs per radio

    LAN
    IP (check validity and DHCP server IP range) MAC

    SSID-to-VLAN Tagging
    Supports 802.1q SSID-to-VLAN tagging

    Spanning Tree
    Supports 802.1d Spanning Tree Protocol

    Wireless
    Wireless Mode: 11a/11b/11g/11n
    Channel selection (settings vary by country)
    Channel bandwidth (Auto, 20 MHz, 40 MHz)
    Transmission rate:
    2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
    5 GHz: 11n only, 11a/n mix, 11a only

    QoS
    WMM  (Wireless Multimedia)

    VPN
    Pass-through (PPTP, L2TP, IPSec)

    WPS
    Software only

    Management

    Tx Power Control:
    Adjust transmit power by dBm

    Configuration:
    Web-based configuration (http)/Telnet

    Telnet Server:
    CLI

    Firmware Upgrade:
    Via web browser, settings are reserved after upgrade

    Administrator Setting:
    Administrator Username and Password Change

    Reset Setting:
    Reboot (press 1 second).
    Reset to factory default (press 10 seconds)

    System Monitoring:
    Status Statistic and Event Log

    SNMP:
    V1, V2c, V3

    MIB:
    MIB I, MIB II (RFC1213) and private MIB

    Traffic Shaping:
    Incoming and outgoing wireless traffic shaping

    Auto-channel Selection:
    Automatically selecting least congested channel

    Bandwidth Measurement:
    IP range and bandwidth management

    Auto Reboot:
    Reboot Access Point by minute, hour, day, or week

    Backup and Restore:
    Save and restore settings through Web interface

    CLI:
    Supports Command Line Interface

    Diagnosis:
    IP pinging statistics

    Log:
    SysLog and Local Log support

    LED Control:
    On/Off

    AP Detection:
    Scanning for available EnGenius APs

    Wireless Security
    WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
    WPA/WPA2 Enterprise (WPA-EAP using TKIP)
    802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
    SSID broadcast enable/disable
    MAC Address Filtering, Up to 50 field
    L2 Isolation (Access Point mode)
    Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

    QoS (Quality of Service)
    WMM (Wireless Multimedia)

    Environmental & Physical

    Temperature Range
    Operating: 0 to 50ºC (32º to 122ºF)
    Storage: -20ºC to 60ºC (-4Fº to 140ºF)

    Humidity (non-condensing)
    Operating: 90% or less
    Storage: 90% or less

    Certifications
    FCC, IC

    Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

    Dimensions & Weights
    ECB600 Device
    Weight: 1.06 lbs.
    Width: 5.50”
    Length: 7.44”
    Height: 1”

    Package Contents
    ECB600 Dual Band N600 Indoor Access Point/Client Bridge
    12V/2A Power Adapter
    RJ-45 Ethernet Cable
    Quick Installation Guide
    CD with User Manual

    Warranty
    1 Year

     

     

     
Danh mục sản phẩm

Hỗ trợ kinh doanh

Lê Long
0944209666
Sang.tanlong
Lê Văn Sang
0987661188
sang.tanlong
Hà Phương
0943864688
Sang.tanlong