Giỏ hàng

Thiết bị phát Wifi 3G 4G Teltonika RUT241

Liên hệ

KHUYẾN MÃI

Giao hàng siêu tốc trong nội thành Hà Nội & Sài Gòn.

Cài đặt, hướng dẫn sử dụng miễn phí toàn quốc.

Miễn phí giao hàng toàn quốc.

Cam kết chính hãng, nguyên hộp mới 100%.

Đổi mới trong vòng 7 ngày nếu lỗi.

Nếu quý khách ngại đặt hàng. Hãy gọi 0987.66.11.88 để mua hàng nhanh nhất

RUT241 của Teltonika là phiên bản cập nhật của RUT240, một trong những bộ định tuyến bán chạy nhất và tiết kiệm chi phí. Cũng giống như RUT240, RUT241 là bộ định tuyến 4G LTE Cat 4, có khả năng đạt được tốc độ thông lượng di động lên đến 150Mbps và được xây dựng với khung cấp công nghiệp mạnh mẽ. Bộ định tuyến này vượt trội trong nhiều tình huống khác nhau, từ môi trường gia đình trong nước đến văn phòng kinh doanh chuyên nghiệp và thậm chí cả môi trường và phương tiện công nghiệp. Ưu điểm chính của RUT241 là nó có RAM 128MB, gấp đôi dung lượng 64MB của RUT240, có nghĩa là nó có khả năng hoạt động trơn tru và nhanh chóng mọi lúc. Giao diện web của thiết bị này nói riêng trôi chảy và trực quan hơn nhiều với sức mạnh tải tăng lên này. Bộ định tuyến hỗ trợ hai cổng Ethernet 10 / 100Mbps và ba giao diện ăng-ten (1x WiFi và 2x Mobile LTE). Ngoài PSU DC đi kèm với thiết bị, nó cũng có thể được cấp nguồn qua 9-30v Power over Ethernet (PoE) thông qua cổng LAN1. Điều này cho phép tăng tính linh hoạt khi quyết định vị trí của bộ định tuyến vì nó có thể cách ổ cắm điện tiêu chuẩn một khoảng cách hợp lý.

Đặc điểm nổi bật:

  • Kết nối Ethernet Linh Hoạt: Với 1 cổng WAN có thể chuyển đổi thành cổng LAN và 1 cổng LAN, cả hai đều hoạt động với tốc độ 10/100 Mbps, thiết bị này đảm bảo tính linh hoạt và đa dạng trong cấu hình mạng.
  • Tốc độ Di Động Nhanh Chóng: Với khả năng hỗ trợ 4G (LTE) đến 150 Mb/s, 3G đến 42 Mb/s và 2G đến 236.8 kb/s, bạn có thể tin tưởng vào tốc độ và độ ổn định của kết nối mạng.
  • Mạng Wifi Hiệu Quả: Với chuẩn IEEE 802.11b/g/n, RUT241 không chỉ là một bộ định tuyến mạnh mẽ mà còn là một điểm truy cập Wifi linh hoạt, giúp mở rộng phạm vi kết nối mạng một cách hiệu quả.
  • Kích Thước Nhỏ Gọn: Với kích thước chỉ 83 x 25 x 74 mm, thiết bị này rất tiện lợi cho việc lắp đặt và di chuyển trong các không gian hạn chế.
  • Nguồn Điện Linh Hoạt: Với phạm vi điện áp từ 9-30 V DC, bạn có thể dễ dàng kết nối với nguồn điện khác nhau mà không gặp rắc rối.
  • Hệ Điều Hành An Toàn và Dễ Sử Dụng: RutOS không chỉ cung cấp một nền tảng an toàn mà còn dễ sử dụng, giúp bạn quản lý mạng một cách linh hoạt và hiệu quả.
  • Quản Lý Từ Xa Tiện Lợi: Hỗ trợ Hệ thống quản lý từ xa Teltonika, cho phép bạn dễ dàng quản lý và giám sát thiết bị từ bất kỳ đâu, bất kỳ khi nào.
  • Lắp Đặt Dễ Dàng: Với khả năng lắp đặt trên thanh ray DIN, RUT241 phù hợp cho việc triển khai trong các môi trường công nghiệp mà không cần phải lo lắng về không gian và độ bảo vệ.
  • Bảo Vệ Đáng Tin Cậy: Thiết bị đạt chuẩn bảo vệ IP30, giúp bảo vệ khỏi bụi và độ ẩm, đảm bảo hoạt động ổn định trong môi trường làm việc khắc nghiệt.

Thông số kĩ thuật

Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
Black/White list Operator black/white list
Band management Band lock, Used band status display
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
Multiple PDN (optional) Possibility to use different PDNs for multiple network access and services (not available in standard FW)
WIRELESS
Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi security WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID SSID stealth mode and access control based on MAC address
WiFi users Up to 50 simultaneous connections
Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules
DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancing Balance your internet traffic over multiple WAN connections
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
SECURITY
Authentication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port and tag based VLAN separation
Mobile quota control Set up custom data limits for the SIM card
WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server services can run simultaneously
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code
SSTP SSTP client instance support
ZeroTier ZeroTier VPN
WireGuard WireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filtering Respond to one ID in range [1;255] or any
Allow Remote Access Allow access through WAN
Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
Supported functions 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
Protocol HTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
MQTT gateway Allows sending commands and receiving data from MODBUS Master through MQTT broker
MONITORING & MANAGEMENT
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA Firmware update from sever, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off
TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT MQTT Broker, MQTT publisher
SNMP SNMP (v1, v2, v3), SNMP trap
JSON-RPC Management API over HTTP/HTTPS
MODBUS MODBUS TCP status/control
RMS Teltonika Remote Management System (RMS)
IoT PLATFORMS
Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPU Mediatek MIPS 24Kc 580 MHz
RAM 128 MB, DDR2
FLASH storage 16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices
Keep settings Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools SDK package with built environment provided
INPUT/OUTPUT
Input 1 x Digital input, 0 – 5 V detected as logic low, 8 – 30 V detected as logic high
Output 1 x Digital open collector output, max output 30 V, 300 mA
Events SMS, EMAIL, RMS
POWER
Connector 4 pin industrial DC power socket
Input voltage range 9 – 30 VDC, reverse polarity protection, surge protection >33 VDC 10us max
PoE (passive) Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt
Power consumption < 6.5 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet 2 x RJ45 ports, 10/100 Mbps
I/O’s 1 x Digital Input, 1 x Digital Output on 4 pin power connector
Status LEDs 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power 1 x 4 pin DC connector
Antennas 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
Reset Reboot/Factory reset button
PHYSICAL SPECIFICATION
Casing material Aluminium housing with DIN rail mounting option, plastic panels
Dimensions (W x H x D) 83 x 25 x 74 mm
Weight 125 g
Mounting options Bottom and sideways DIN rail mounting slots
OPERATING ENVIRONMENT
Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30
REGULATORY & TYPE APPROVALS
Regulatory CE/RED, UKCA, CB
EMI IMMUNITY
Standards EN 301 489-1 V2.2.3 EN 301 489-17 V3.2.4 Final draft EN 301 489-52 V1.2.0 EN 55032:2015+A1:2020 EN 55035:2017+A11:2020 EN 61000-3-3:2013+A1:2019 EN IEC 61000-3-2:2019
ESD EN 61000-4-2:2009
Radiated Immunity EN 61000-4-3:2020
EFT EN 61000-4-4:2012
Surge Immunity (AC Mains Power Port) EN 61000-4-5:2014+A1:2017
Conducted Immunity EN 61000-4-6:2014
DIP EN IEC 61000-4-11:2020
RF
Standards EN 300 328 V2.2.2, EN 301 511 V12.5.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1
SAFETY
Standards EN IEC 62311:2020, EN 50665:2017, EN IEC 62368-1:2020+A11:2020, IEC 62368-1:2018